Where does Adobe AIR look for the proxy settings in Ubuntu Linux

I am building an AIR app that makes a call to a remote server within the company network The Adobe AIr runtime seems to be looking at the proxy settings of the OS.I have added the location to the No_proxy variable in bashrc under my user id. whenever i call adl to run the code it seems to be accessing the proxy server , causing time out problems and Actionscript ioError 2032 Where are the proxy settings in Ubuntu Ibex that Adobe AIR runtime seems to be accessing and can we add a no_proxy

Fiddler and Windows Phone 7 emulator - redirect to proxy

I am just curious - did anyone got Fiddler to work with Windows Phone 7 emulator (RTW build)? When I try working with Fiddler, I am getting a WebException when working with HttpWebRequest insances - NotFound, to be specific. WireShark works fine. The problem I see here is that Fiddler acts as a proxy and the WP7 application I am using doesn't go through a proxy to pass the request, while WireShark works differently - it doesn't directly pass traffic through it. There was a similar question her

Tools for setting up Proxy Chain

We are trying to setup a chain of proxy server in our development system. We wanted to connect to a service through these proxies. The reason why we thought about proxy chaining is that there is no connectivity to the service from all the systems. So we thought we will run a proxy on one system, which will connect to a proxy on another system and so on. Client ---> A (Proxy)--->B(proxy)---->Final destination Could you please suggest some tools to achieve this? The service that we hav

How to set up a ping tunnel without a host and a proxy

I have been reading about setting up a ping tunnel to access the internet when you can only send ICMP packets. Ptunnel seems to be a popular program and the instructions to use it can be found here http://www.cs.uit.no/~daniels/PingTunnel/. The instructions to this program say that you must have both a client and proxy computer. I do not understand the benefit of a ping tunnel if you must have a proxy computer that can send TCP/IP packets. If I had a computer that could do that, I wouldn't n

How to set proxy for JMeter from behind another proxy?

I'm new to jmeter. I'm trying to test a web app using proxy server. I have gone through the jmeter docs and got the settings but I'm currently working under company proxy. So how can I set the proxy server for jmeter from behind the current proxy?

Proxy JProfiler - how to profile remote application when there is firewall?

I successfully managed to install the JProfiler remote probe and I see it running in 'catalina.out' (Tomcat). The only problem is that all ports on the remote machine are firewalled (except for 80 and 8080) and no matter which port I chose, the JProfiler GUI can't connect to the remote probe. I tried to use PuTTY tunneling but I'm not really sure how to set up the tunneling rules. Moreover, it seems that there are no 'network preferences' in JProfiler where I can specify SOCKS proxy. How can I

How to capture traffic with fiddler while using another proxy

To access some websites that I need to test I need to plugin some specific proxies on firefox. However when I set my proxy through firefox or any browser, fiddler doesnt capture anymore request, due that it also uses its own proxy to get the requests. Is there any way I could capture traffic using fiddler while at the same time Im using an external proxy using any browser?

charles proxy add code into head tag

I am using the charles proxy for unit testing the my some functionality. I wanted to add the style.css file into some site. I am using the rewrite rule this. I wanted to add the my custom CSS into the head section of webpage. Can anybody knows about this. How to inject the custom code into webpage using charles proxy.

Proxy Full Clustering in Apache Traffic Server

I followed the steps mentioned in the official documentation for full clustering of multiple ATS instances. I installed 2 instances of ATS on 2 different Ubuntu machines (having the same specs, OS versions and hardware), and both of these act as a reverse proxy for web service hosted on a Tomcat server in a different machine. I wasnt able to set up the cluster. Here are some of the queries that I have. They are on the same switch or same VLAN : The two Ubuntu machines on which I installed the

golang ReverseProxy not working

I don't know why this reverse proxy is not working. I've seen several examples and I can't find anything wrong with it. package main import ( "log" "net/url" "net/http" "net/http/httputil" ) func report(r *http.Request){ log.Print("URL: " + r.URL.Path) log.Print("Scheme: " + r.URL.Scheme) log.Print("Host: " + r.URL.Host) //r.URL.Scheme = "http" //r.URL.Host = "stackoverflow.com" //r.Header.Set("Host", "stackoverflow.com") //log.Print("Header Host: " + r.Header.

Sublime3 throw error after added the proxy details

In my sublime3 (standalone) I am getting the error, while i run a command: `urllib.error.HTTPError: HTTP Error 407: Proxy Authentication Required ( Forefront TMG requires authorization to fulfill the request. Access to the Web Proxy filter is denied. ) ` I understand that, it require the proxy setting and credentials, for that I ran this command adding my proxy informatins: import urllib.request,os,hashlib; h = '7183a2d3e96f11eeadd761d777e62404' + 'e330c659d4bb41d3bdf022e94cab3cd0'; pf = 'P

Elasticsearch Proxy Kibana through Zuul

I'm actually working on elsasticsearch technologies and I want to use kibana behind a proxy. My choice went to zuul as it's easy to use and allow me to do dynamic routing. But I'm facing an issue. All the page seemed load correctly, but I can't create a default index pattern through the proxy. My guess is that spring-cloud-netfix with zuul does not support redirects (like with ProxyPassReverse in Apache2) so redirects go to the physical URL of the proxied application what typically means that th

how the cache coming to the java application proxy server?

I have developed a proxy server to cache. but cache is not saving in anywhere. but I have used hash map to map cache objects. When I check it by using if condition it says its coming from cache, i need to know whether this cache is coming from the browser cache? and how?

Is it possible to proxy the html get request to /graphql from a create-react-app?

I have a create-react-app application in which I enabled the proxy by adding: "proxy": "http://localhost:3001", to my package.json. That's working well for API requests to /graphql, but when the web browser request /graphql (for the purpose of loading the UI to run queries) gets handled by the frontend and not proxied. Is it possible to also proxy it? Same thing happens when I try to do OAuth by visiting https://localhost:3000/auth/facebook, the frontend handles it instead of the backend.

Getting error connection refused when trying to consul connect using sidecar proxy to web

I am following this tutorial https://learn.hashicorp.com/consul/getting-started/connect at the point when I ran consul connect proxy -sidecar-for web it started throwing this error: 2020-07-26T14:30:18.243+0100 [ERROR] proxy.inbound: failed to dial: error="dial tcp connect: can't assign requested address" why this does not have port assigned in his demonstration ? { "service": { "name": "web", "connect": { "si

Charles Proxy Rewrite vs MapLocal

I've been working with Charles proxy these past few days to attempt to mock out a few responses specifically the rewrite tool. I was surprised to find that the Rewrite tool can't rewrite the response with data it gleans from the request. As powerful as it is, and it really is powerful some of the shortcomings I've found or haven't figured out how to achieve with the rewrite tool are :- Doesn't intercept the call as such, it just rewrites the request/response on the way in and the way out. Can't

Proxy Envoy and GRPC not working (no healthy upstream)

I have a Java back-end providing GRPC and it works quite well when using without Envoy, however for GRPC-web, it gives me 503 response. I've been trying for several days now without any success. Here's my envoy.yaml: admin: access_log_path: /tmp/admin_access.log address: socket_address: { address:, port_value: 9901 } static_resources: listeners: - name: listener_0 address: socket_address: { address:, port_value: 8081 } filter_chains: - f

Rotating Proxy (STORM, SMART) not giving unique IP in each scrapy request

How do I make sure I am getting new ip in each scrapy request? I tried with both stormproxies and smartproxies but the ip it gives is same for a session. However, the ip is new on each run. But for a single session, the ip is same. My code below: import json import uuid import scrapy from scrapy.crawler import CrawlerProcess class IpTest(scrapy.Spider): name = 'IP_test' previous_ip = '' count = 1 ip_url = 'https://ifconfig.me/all.json' def start_requests(self,): yie

Proxy Hoverfly mock not being hit by proxied Axios request

I want to use Hoverfly to mock an API response. It's working from the command line but not from my actual app. The problem exists even with a situation as simple as the new user example. As in the tutorial, I created a log with: hoverctl start hoverctl mode capture curl --proxy http://localhost:8500 http://time.jsontest.com hoverctl export simulation.json hoverctl stop And then set up the simulation as in the next tutorial: hoverctl start hoverctl import simulation.json hoverctl mode simulate c

Proxy performance tuning ask for advice

I found when I turn off (un-select) automatically detect proxies setting in Internet Options, my application (which involves a lot of Http based network communication) performance will boost a lot. Now I want to prove that performance issue is actually caused by automatically proxy detection. Any ideas from debugger or from other points to prove? thanks in advance, George

Detect an elite proxy

How can i detect an elite proxy? it's ok if i don't get them all, since it won't be possible but atleast most of them?

Proxy How do I configure FF7.0.1 for JMeter

I am following a tutorial but it does not say how to configure your FF to use the proxy? I go to Edit -> Preferences -> Network Tab -> Click on Settings -> Manual proxy configuration. What do I type in HTTP Proxy and No Proxy for? I checked the "Use this proxy server for all protocols"? I have typed in the ip address of the server where my website is hosted and used port 80, I typed in localhost, into the "No Proxy for" box. I have set up jmeter according to the tutorial

Using a local proxy auto configuration (.pac) file for proxy settings from a chrome extension

I want to modify the proxy settings of chrome using an extension. I want it to use a local .pac file which is present in my extension's root folder. I tried following ways to refer this pac file: settings.pacScript.url = "proxyFile.pac"; settings.pacScript.url = "chrome-extension://adcccdddeeefffggghhhiiijjjkkklll/proxyFile.pac"; These two methods do not work. I tried using "chrome://net-internals" to inspect what is happening and found the following(there was no file not found error or pac

Proxy for multiple test environment

I am trying to setup Test Automation process to be executed on multiple Under Test Environments acting on intermediate proxy. See below picture Existing test automation process is based on data-driven testing and it contains urls provided by manual testers from production analysis (e.g. bugs, new features, etc...). This test automation process can be executed on various testing environment (e.g. pre-production and production) depending various factors decided at run time. I don't want to h

Access ftp server behind proxy

I want to access the FTP server via python. It is behind our company's proxy. On company's network, I can access the ftp server using from ftplib import FTP ftp_host = "example.com" ftp_user = "my_ftp_user" ftp_password = "my_ftp_password" ftp.dir() Outside company's network, I need to use proxy. I have the following details: ftp_host ftp_user ftp_password proxy_host proxy_user proxy_password I have tried: ftp = FTP(host=ftp_host, user=ftp_user, passwd=ftp_password, source_address=None,

Stream a file on GCS to client via a proxy Cloud Function

I'd like to have a cloud function that streams data byte by byte from a file on GCS. For instance: I have a file on this path: gs://my-bucket/folder/document.pdf whose access is restricted to a single service account. Then I have a proxy Cloud Function, triggered by calling this URL: https://us-central1-my-project.cloudfunctions.net/gcs-proxy/folder/document.pdf. The name of the function is of course gcs-proxy. Is there a way to "transfer" the file on GCS to the client without entirely read i

How to use proxy with TwitterConsumer class from DotNetOpenAuth.ApplicationBlock

I am currently implementing SSO with DotNetOpenAuth. However, when working locally, I need to send requests via a proxy. I am happy to do this programatically or via config setting but I am struggling to find where to add it to the TwitterConsumer class supplied in the application block. Any help much appreciated

Apache forward proxy that handles https

I followed the example in the following SO question to successfully set up an Apache forwarding proxy: Setting up an Apache Proxy with Authentication It works well, except that when accessing sites via https, it says it cannot find the site. For example, Chrome gives Error 111 (net::ERR_TUNNEL_CONNECTION_FAILED): Unknown error. And on the server, I do not even see something in the access logs. For my proxy settings, I have configured the same for http and https (i.e. port 80 on my proxy serv

Google Mirror API Subscription Proxy : HTTP method GET is not supported by this URL

I downloaded Google Glass Mirror API quickstart for .NET and it is working fine in the localhost. Now, i want to subscribe for my app. Since localhost is not SSL enabled, i am trying to use subscription proxy service provided by Google here. When i append the proxy server URL, my call back URI looks like below. https://mirrornotifications.appspot.com/forward?url=http://localhost:61422/oauth2callback Now, when i run the application, i get the error Error: HTTP method GET is not supported by t

Could not change Nutch http proxy scheme to basic

No matter what I typed, it always goes to NTLM. I want my scheme as basic. With my proxy, id and pwd, curl works. However Nutch does not work. I think it could be the matter of encoding(capital letter, etc.), so want to figure it out. However, as it always sets scheme as NTLM, it hides id and pwd in log. ---httpclient-auth.xml--- <auth-configuration> <credentials username="id" password="pw"> <default/> </credentials> </auth-configuratio

iptables or proxy to redirect traffic to "slaves" without traffic continuously passing through "main" server?

I have a setup with a "main" server and then a set of "slaves" that do the hard work. All users connect to the "main" that then redirects them to a "slave". Ideally I want the system to work in such a way that a user connects to "main" who then redirects to a "slave" and then all future communication is done directly between the user and the "slave" without any packets passing through the "main". Right now I'm using iptables with: iptables -t nat -A PREROUTING -i eth0 -p udp -j DNAT --dport $

Proxy Certificates between ZAP and BURP

I have both certificates from ZAP and BURP on my browser, and I can surf through SSL websites without problems with each proxy. Now, I am using BURP as my local proxy on port 9090 and I redirect the traffic from BURP to ZAP (listening on port 8080). When surfing through non-SSL websites, everything is alright, I catch the traffic in BURP and redirect it to ZAP, but when I go to a SSL website, an non-trusted message pops up. What is going on¿? Do I have to export BURP certificate and import it

Proxy Migrating a service from one docker container to another with zero downtime

I am trying to experiment with container service migration. I have three machines where two of them have the exact service running which does some work and returns some HTML data. The third machine is my client which I am using for sending requests to the service running in one of the containers mentioned before. All three machines for simplicity are in the same network. Since I know the IP's of all the machines, I use my client's browser to send a request to one machine and get the HTML data on

Proxy Docker private registry issue

I run private registry on UBUNTU 14.04: docker run -d -p 5000:5000 registry The proces appeard on my docker proces list. I wrote command : curl my-external-ip and I got this: "\"docker-registry server\"" THE PROBLEM IS that when I try to push image on localhost it works fine, but after I want to push to external ip (It must be available for for more people) I got this: The push refers to a repository [MY-EXTERNAL-IP:5000/hello] (len: 1) unable to ping registry endpoint https:/

Nexus (proxy)Repository Connection pending on remote storage And 404 on repository acces

I have set up a sonatype Nexus 3.0.0-03. And trying to configure proxy repositories. Problems: the created repositories are not accessible. 404 If I just open repository URL. The status in the repositories overview is on Online - Remote Connection Pending... Type and Format of repository I have setup: proxy, npm proxy, nuget proxy, maven The goal is proxy the remote Nexus npm repository and use it as a npm registry. Additional information: I have no access to the settings of the rem

How to proxy a http request through Charles

I have a mac mini that is sharing it's wifi connection. It's broadcasting the wifi network foobar. I connect to the network from Mac Pro, if I visit the following address from my Mac Pro my requests are proxied through Charles. This makes sense bc that is the IP of the computer running Charles, and Charles is running on port 8888. So far so good. The problem is I want to proxy a request to yahoo though Charles i.e. To w

Proxy Why is the zone "asia-northeast1-a" showing up as in California instead of Japan

According to https://cloud.google.com/compute/docs/regions-zones/, the region/zone "asia-northeast1-a/b/c/" should suppose to be in Tokyo, Japan. But once I came up with the virtual machine with that zone/region, an IP trace/lookup website such as http://www.ip-tracker.org/locator/ip-lookup.php would say the VM is still in California where Google is. I meant to have the VM set up as a proxy (server) so that the VM appears to be in Japan to be able to browse content restricted to Japan. Am I misu

Is it possible to get webpack-dev-server to ignore all but a certain path in the proxy settings?

I've got my WDS running on port 9000, and the webpack bundles located under /dist/ I've got a back end server running on port 55555 Is there a way to get WDS to ignore (proxy to 55555) every call except those starting with /dist/? I've got the following: devServer: { port: 9000, proxy: { "/dist": "http://localhost:9000", "/": "http://localhost:55555" } } Trouble is, that root ("/") just overrides everything... Thanks for any advice you can offer. UPDATE: I've

Apache Http Components - How to timeout CONNECT request to a proxy?

Timeout Without Using Proxy I start netcat in my local as follows, which basically listens to connections on port 9090: netcat -l -p 9090 And using Apache HttpComponents, I create a connection to it with a timeout of 4 seconds.. RequestConfig requestConfig = RequestConfig.custom() .setSocketTimeout(4000) .setConnectTimeout(4000) .setConnectionRequestTimeout(4000) .build(); HttpGet httpget = new HttpGet(""); httpget.setConfig(requestConfi

Plesk activation not possible because telnet does not user proxy enviroment variables

I try to activate plesk on a webserver with an activation code. The webserver is behind a firewall and can communicate only over a proxy server. The proxy env vars are set and working but telnet does not use them. It seems that plesk uses telnet to communicate with the licence server. Is there a way to configure plesk in a way so it uses a proxy. Or can I configure telnet somehow to use a proxy? Thank you

Scrapy crawl with proxy

I wrote a Scrapy middleware to must use proxy on every request via scrapy.Request(url). My custom middleware: class MyCustomProxyMiddleware(object): def __init__(self, settings): self.chosen_proxy = settings.get('ROTATOR_PROXY', None) @classmethod def from_crawler(cls, crawler): return cls(crawler.settings) def process_request(self, request, spider): if self.chosen_proxy is not None: request.meta["proxy"] = self.chosen_proxy log.debug('Using proxy <%s&

Proxy How to make a circuit-breaker in Istio?

I am trying to configure a circuit breaker in Istio. This is the yaml. trafficPolicy: connectionPool: http: http1MaxPendingRequests: 1 maxRequestsPerConnection: 1 tcp: maxConnections: 1 outlierDetection: baseEjectionTime: 1m consecutive5xxErrors: 1 interval: 1s I have a list of thread groups in JMeter that will be continously hitting the service associated with the above circuit breaker. Upon receiving an error response, it should be

WebClient and proxy server (Ntlm auth maybe?)

Having some issues connecting to internet from an application where a customer is using a proxy server. The following code seems to work most other customers, including those that use proxies. Dim wc As New WebClient wc.UseDefaultCredentials = True wc.Proxy = WebRequest.DefaultWebProxy wc.Proxy.Credentials = wc.Credentials Dim responseBytes As Byte() = wc.DownloadData("http://www.google.co.uk") Error is: System.Net.WebException: The remote server returned an error: (407) Proxy Authen

Minimal example of using grunt-connect-proxy

I have an angularJs App which I built with grunt and a server backend written in Java running on a tomcat server. To wire those together when development I wanted to use grunt-connect-proxy. But I could not get it to work even a bit. All the "examples" and "demos" I found on the web happened to use a several hundred lines long Gruntfile.js. That turned out not to be really useful in finding my problem. What does a minimal (!) example look like?

Proxy Scrapyd Retry if Errback in twisted deferreds / Could not open CONNECT tunnel Error

I'm working with a cycle of proxies in Scrapy, sometimes some proxies have errors and that's stopping my spider.. The error is "Could not open CONNECT tunnel" How do I change the code to retry with another proxy in case of this error? Here's the code that needs to be modified: https://github.com/scrapy/scrapy/blob/master/scrapy/core/downloader/handlers/http11.py

how to allow clients connecting to some websites over proxy with their IPs?

I am config squid as forward proxy and everything work correctly. Some websites block my squid server IP and when a client trying connect to that websites over my proxy sever,it can not access to them. I want to telling squid that when a client request that website, squid lets clients to connect to that website directly and do not using proxy server public IP address for this connection and using clients real IP instead of server IP.

How do I set up a proxy server using digest authentication with sha256 algorithm?

I'm using Squid on Ubuntu 20.04 and I'm trying to set up a proxy server using digest authentication. I have created a password file with: htdigest -c /etc/squid/user_squid <realm> <username> and I have the following in my squid.conf: auth_param digest program /usr/lib/squid/digest_file_auth -c /etc/squid/user_squid auth_param digest children 5 auth_param digest realm <realm> acl authenticated proxy_auth REQUIRED http_access deny !authenticated This works ok, only that the alg

proxychains unable to connect

Here is the terminal log when I run proxychains4 chromium google.com [proxychains] config file found: /etc/proxychains4.conf [proxychains] preloading /usr/lib/x86_64-linux-gnu/libproxychains.so.4 [proxychains] DLL init: proxychains-ng 4.14 2020/12/03 10:49:55.184436 system_key.go:147: cannot determine seccomp compiler version in generateSystemKey: invalid format of version-info: "[proxychains] DLL init: proxychains-ng 4.14\ne8aa8f6eafa3be3b3303d3ba093fddcefa875298 2.4.3 9b218ef9a4e508dd8a7

Connection over a proxy Quickfix/n

I am trying to establish a connection with quickfix/n but I am behind the company firewall. So I need to connect over a proxy to the acceptor. According to the documentation of quickfix/j it is possible via JAVA, however in the documentation of quickfix/n there is no information about possibility of connecting to the acceptor over a proxy via C#. Is it possible at all to do that from C# with quickfix/n ? In JAVA this can be done via configuration file, e.g.: ProxyType=http ProxyVersion=1.1 Proxy

  1    2   3   4   5   6  ... 下一页 最后一页 共 8 页